Showing posts with label Tonic. Show all posts
Showing posts with label Tonic. Show all posts

Wednesday, April 22, 2020

En Pointe!

Hello again friends! 

I'm so excited to show you the light up box card that I made using Kindred Stamps new "En Pointe" stamp set! This set is full of the cutest little critters doing ballet!

I started by coloring up the ballerinas in realistic colors using Copics. I gave them each their own colored tutus, and for the unicorn, I went with bright bold colors. After they were colored I used Ink on 3 Liquid Pixie Dust painted on with a small paintbrush to accent their tutus, headbands and shoes.

I decided that I wanted to make a box card using The Stamp Doctor's A2 Card in a Box #2 die set to make a stage for my dancing cuties.  I started with a tan cardstock and cut 3 of the panels for the card using it. Then I cut the 4th out of black cardstock.

I built my card and used a champagne bokeh (I think that's how it's spelled!) scrapbook paper to create panels on the 3 outward facing tan panels. For the front top panel I stamped the "Dance Your Heart Out" sentiment from "En Pointe."



For the inside, I used the Kindred Stamps Woodgrain Stencil, I ink blended Catherine Pooler Sand Castle and Over Coffee inks to create a wood floor for the stage. I did this on the 3 tan panels for their inner facing side. I added the same scrapbook paper to the 3 inner facing tan panels too. I used the stencil on the 3 strips I was  placing my ballerinas on too.


For the back of the stage, I sprayed Tonic Nuvo Mica Mist in Fog on the black cardstock. After the card was built, I decided I wanted to make it light up so I took a second layer of the black card stock and sprayed it. Then I used a star hole punch and punched out a few stars in the second layer. 



I used Pear Blossom Press EZ Lights that come pre-wired with 3 led lights. I chose where to put the lights and fed them through the back of the box securing them with glue dots and the wires with washi tape. The Power Pack battery holder and button for the EZ-Lights is secured in the bottom of the back half of the card using larger glue dots. I covered this with another panel of the tan woodgrain stenciled cardstock. I marked the button with a "Press here" stamp from Heffy Doodle's Interactively Yours stamp set.


For the back, I cut down a piece of white cardstock and used i-crafter Candy Coated ink to stamp the "I hope your birthday is" and "en pointe" sentiments from "En Pointe" leaving space for the card to be written on as well.



The entire Kindred Stamps April release will be available Friday, April 24 at 8am PST/11am EST. Be sure to subscribe to the Kindred Stamps blog to see a daily line up of sneak peeks from our amazing Design Team and see the full product release on Friday! Come join the Fan Club and release event to be part of the release fun, and you may just win some Kindred Stamps credit!!

Until next time,

~R. Winn


Tuesday, February 25, 2020

Family Additions


This set is SO special guys! Today, I am sharing the new Kindred Stamps "Family Additions" stamp set! We wanted a set that really encompassed the ways our family can grow. 

The first card I made, is one showing off how the adorable baby can be used in different ways. For this stamp set, I decided that paper piecing would be a great technique. I used a ton of different paper pads from Echo Park, Lawn Fawn, Sunny Studios, and I'm probably missing a few other. 

The twins, I decided to do in pink and green plaid. I stamped and colored the faces/hands first. Next, after cutting the onesies out, I shaded them with my Copics too, then cut them out and glued them onto the colored bodies. I placed these on vanilla cardstock that was die cut using Tonic dies.


For the card itself, I used more vanilla card stock, and layered a second sheet of vanilla cardstock onto it. Then I took a sheet of mint green card stock and used the Kindred Stamps "Skinny Plaid" stencil with Gold Cosmic Shimmer Glitter Kiss to create a simple, but beautiful background. 

I stamped the sentiment (which is buildable and makes me happy) on a large piece of vanilla cardstock in black ink and cut it down so it was the same width of the background, and centered slightly left on the card. I tied a brown sugar twine bow on the blank right side of the sentiment strip. The sentiment is popped up on some dimensional foam adhesive.

I colored up the pregnant momma a few different times. A fan commented in the Kindred Stamps Fan Club about how important she feels it is for different skin tones to be shown in cards. It really made me think, and gave me a push to attempt to diversify my coloring, darker skin tones are intimidating because they are more difficult to master. That being said, I am pretty pleased with how this momma turned out! I paper pieced her dress to have a rainbow on her belly.


I have several friends who have dealt with miscarriage, and it is so heartbreaking. So, rainbow babies are something so wonderful and magical, they represent love, purity, and hope. I used a sheet of Sunny Studios Bright Rainbow paper pad to create a background for this card. I used a scrap sheet of patterned paper that I die cut using The Stamp Doctor Oval dies, I popped the momma on that oval. 

For the sentiment, I decided a layer of clouds would be cute to stamp on. I used Rina K Electro Pop Raging Red ink and the rainbow sentiment. To finish the clouds off, I used some leftover Rina K Electro Pop Blaring Blue that was on one of my brushes to dust the edges of the cloud. After assembling the card, I added a few Doodlebug Sprinkles to the top right of the card. 



Next, there is an adorable adoption card, or step-child, or fostering, really anything that's a bit non-traditional I suppose! My family is big, and blended, and beautiful, so this sentiment REALLY hits my heart. 

I started by using the Kindred Stamps Star Stencil and some Metallix White Pearl Gel, I angled the stencil and just did the bottom left of the card with it. For this baby, I did a light blue, star onesie, again paper pieced and then shaded with Copics. 


I stamped the sentiments on gray cardstock, then die cut them using banners from The Stamp Doctor. The card was finished off with a few white star enamel embellishments. 

My last card, I used a stencil from A Colorful Life Designs, that had the negative of the stencil included, I created a sort of spotlight using the stencil negative and Rina K Electro Pop Blaring Blue ink. I put the momma in the spotlight, she was colored up and then paper pieced in a pretty blue dress. 


The sentiment was stamped in that same blue ink on a tag. I finished it off with a brad, normally I don't use brads... cause they're stabby, but it just was perfect for this card. 

The "Family Additions" set is just one of the awesome new stamps we are releasing this week, I hope you've enjoyed my take on it! The entire Kindred Stamps February release will be available Friday, February 28th at 8am PST/11am EST. Be sure to subscribe to the Kindred Stamps blog to see a daily line up of sneak peeks from our amazing Design Team and see the full product release on Friday! Come join the Fan Club and release event to be part of the release fun, and you may just win some Kindred Stamps credit!!

I will see you all next time!
~R. Winn



Sunday, September 15, 2019

Teen Detectives Box

Hi friends!

It's no mystery that we are excited about our newest Limited Edition box at Kindred Stamps! The theme this time around? Teen Detectives! This box includes a 6"x8" stamp set, a custom paper pack, a custom washi tape, a loose glitter pot, and an amazing stencil; there are a few other things, I just can't think of them right now.

Any who, I created 3 fun projects using this set, take a look...

My first project involves two of the detectives, and their furry counterpart! I colored the girl using Copics, but the boy and the dog were colored using Chameleon Markers. 


For the background, I started with a grey paper, for a dusky sky feel. The trees are different shades of green scrap paper I had in my overflowing scrap drawer, cut out using an old Stampin' Up Christmas tree die set. I layered the different sizes and shades to feel like a forest.  I had planned on just placing the kids and dog in front of the trees, but because I had used different dimensional adhesives to layer, there was an odd gap beneath them. I decided a road using Tonic Expanding Mousse, I mixed about 5 different colors, attempting to make brown. I ended up with more of a gray, and it looked like a gravel road after heating it with the heat gun!

I typically leave the insides of my cards blank, but... this sentiment just seemed perfect to me! I used Catherine Pooler Orange Twist (which matches the girl's sweater!) and stamped it out right in the center of my card.



Next, I wanted to use the awesome tie dye stencil included in the Teen Detectives Box. Brianne had done an awesome background on white, so I decided to go with a black background and used Distress Oxide inks and my toothbrush makeup brushes to create a tie dye background. Next, I used a Stampin' Up Star die to cut out the center of the card to let the blue base show through.


I always felt these two kiddos had that "young love" thing going on so they felt perfect to make a "love card!" I used banner dies from The Stamp Doctor to cut out the two sentiment banners, and placed them in opposite corners. I finished my card off with a few sequins from the box.

My last card, I had no more teens left to use, nor the energy to color up more. I did have this fantastic star cut out from my other card though... and the custom washi tape included in the Teen Detectives box! I layered 5 strips of the washi tape onto my white cardstock, then used foam adhesive to pop up my tie dye star. 


On my star, I used Brutus Monroe Alabastar Embossing Powder to emboss my sentiment from the Teen Detectives stamp set. Then I took a small brush and Tonic Crystal Glaze and brushed it over and around the sentiment, I used the loose glitter in the box to dust over it. The glaze really allowed the glitter to stay put and not fall off!

I finished the card with some of the sequins in the Shaker Pack included in this box!

I hope you've enjoyed my cards, and cannot wait to see what you make with your own Teen Detectives Box!

~R. Winn


Wednesday, June 26, 2019

Making a Splash with Kindred Summer!

 Long time no see! I'm excited to see you again!

Today, I get to share with you, our Kindred Summer stamp set! We have a fun little tradition where Audra has custom images of the team made up to celebrate new seasons, holidays, etc. Our pool party images were such a hit when we shared them that we thought they would be a perfect stamp set for summer!
My first card is featuring Molly, my best friend, and her amazing hair, sliding into the pool. I wanted to create one layer on this card that was full of details and a simple hand drawn background. I see all sort of people making AMAZING backgrounds by hand, that's outside of my comfort zone, so I figured I could start somewhere, by creating a pool scene.

While I knew I wanted to make Molly my star, I also used Audra on her ducky floaty, hanging out in the pool. I placed sunbathing Marcia on the pool deck, catching some rays. After these 3 were stamped, I took a pencil and a straight edge and created the pool/deck separation line. I started by coloring in my people, I tried to create depth in their colors, next, I did the cement, I used several shades of gray Copics to get depth and shadow. I added the water, again, several shades of blue were used. Last, I used a red Copic to add in the depth markers on the pool deck!


Normally, I stamp my sentiment and then die cut it and put it on the card, for this one, stamping directly on the scene just felt right! I used a WOW embossing powder that I picked up from Kraftgali to make "Hope Your Birthday is a Splash" really pop.  Finally, I used a sheet of the new Kindred Stamps Pool Party Paper Pack to back my "masterpiece" and mounted it on a white card base!

Next, I created a fairly simple, and quick card. I LOVE this sun paper from the Pool Party Paper Pack, and the sentiment "Here Comes the Sun" from Kindred Summer together. I added the 
I stamped my sentiment out using Catherine Pooler Something Borrowed ink, then used Ink On 3 Embossing Ink over top of it, and heat embossed with Lindy's Gang powder. It has a slight iridescent shimmer to it. I die cut the sentiment using a Tonic Oval.


My sun paper was amazing, but I felt like the Memeory Box die cut took it to the next level. I layered my die cut sun paper onto a piece of blue paper from Stampin' Up that matched my Catherine Pooler ink well. I loved the card, but felt like a blue SPARKLY ribbon down the center of the card, below the sentiment really finished it off.

My last card was an adventure! My little sister, Addison, feels that she should ALWAYS be made into a stamp. So, I decided to do a mirror image stamp of the Rachel stamp, this allowed me to create a pool scene with the two of us.

I colored myself first, I used lighter hair colors, and then finished myself off with a bit of R20 and created a sunburn look. (I don't tan, I lobster). I chose a colorful, yet clean look for my unicorn, and added sparkle with Wink of Stella. 

For Addison, my mirror image skills... well they don't exist... it took me a few tries to be ok with my stamped image. I went ahead and colored her with a slightly darker skin and hair color, she tans, well. I didn't love the thought of my baby sister in a bikini, so I went ahead and colored the belly area giving her a tankini instead! For her unicorn, I did an obnoxious pink, because she has a BRIGHT personality! My lines were not as crisp as I would have liked, so I went over them with a black marker after I finished coloring... her nose may have been compromised...


Again, this Pool Party Paper Pack... it's amazing. I loved the pool water sheet and felt like a double slider be fun. I used Lawn Fawn Slider dies and pennies to allow us to float back and forth. I used a few purple and white sequins from a Kindred Shaker Pack to add a little pizzazz to the card. 

Last, I stamped "Float On" onto the beach ball paper using Stazon Purple Pigment and then heat embossed using Brutus Monroe's Fairy Dust embossing powder. I placed my beach ball onto a wobbler and it bounces around when you bop it!


Now that you've stuck with me through three cards, please make sure you leave a comment! I get to give away a $10 store credit and I'm hoping it's you. Leave a comment here and make sure you include your email address so I know where to reach you. 

The entire Kindred Stamps June release will be available Friday, June 28th at 8am PST/11am EST. Be sure to subscribe to the Kindred Stamps blog to see a daily line up of sneak peeks from our amazing Design Team and see the full product release on Friday! Come join the Fan Club and release event to be part of the release fun, and you may just win some Kindred Stamps credit!!
  
Thank you for visiting me, I hope you have a fantastic summer!

~R. Winn

Thursday, November 15, 2018

Adventures Abroad Continues, In Italy!

Hi friends! I hope you've enjoyed the Beth Duff Designs Winter Release so far! I get to share the newest in the Adventures Abroad line, Italy. I absolutely adore this line, and this newest set is a fantastic addition.

I was shown a tutorial about for a card that was super 3D with floating floor. I started by creating the background using a MFT brick stencil, two gray Distressed Oxide inks, and Tonic Expanding Mousse.  In the future I would cut it down to be smaller than the cardbase like a card front layer would normally be, but this was still a bit of trial and error for me!


The floor is cardstock cut to 4 1/4" x 6 1/4" and is scored at 3/8", 4 3/8", and 4 6/8". The short score ends up attaching to the back wall, while the longer end is used at the front of the card. I used a Pen Blade to cut small pieces out of the floor where I wanted my pieces to stand. 


I chose to use 4 pillars, 2 scooters, and of course, the chef! They were colored using Copic markers. I can't remember all of the colors I used, but the pillars are W-1, W-5, and W-7! They are standing up by using small paper "L brackets", to create these I cut several small strips of cardstock and folded them in half. I glued them to the underside of the floor first, then the back of my pieces. 


I staggered the pillars, then I put the scooters in front of the back set. I wanted my chef front and center. I finished my card off using the "Grazie" sentiment, which I love the font of! I heat embossed this in a Wow Gold Pearl powder.


As a bonus, I made a bookmark, I used the small pieces from the set in different light colors, stamped at random. Next, I stamped my favorite sentiment from the sent in black VersaFine Clair ink. I finished this quick project off with a light blue ribbon, knotted simply at the top.

I hope you've enjoyed my take on this set, and cannot wait to see what you make with it! If you want to see more of our team's creations, you're always welcome to visit the Beth Duff Designs blog! Make sure you join us at Unicorn Crafts on Facebook to share your own projects, and see a bit more of all of us, and of course, like the Beth Duff Designs page to see when new and exciting things are happening.

And don't forget to go shopping with Beth Duff Designs!

~R. Winn

Tuesday, August 21, 2018

Magic Show


 Hi friends! 

I'm so excited to share today's cards! I got to play with Kindred Stamps new "Magic Show" stamp set! My littlest sister, Addison absolutely LOVES watching Penn and Teller's Fool Us, and has taken to wanting to visit the magic shop at Pike Place Market when we spend time in Seattle. Audra and her wife, Dylan, got to see Addison's magic trick on one of our last visits. 

After that, Audra put this amazing set together and that adorable little girl in the set? It's based on my Addie! Naturally, I needed to use Addison's tagline, "Wanna see a magic trick?" on the card using her likeness. I wanted to use Sweet Stamp Shop's Peekaboo Window Die, so I started with a black chalkboard cardstock and sprayed Tonic's Silver Smoke Mica Mist on it and let it dry. The die was super easy to use and I will be making a magic color slider with Addison using it at some point. Next, I colored up my girl, making sure she had lots of sparkles and bright colors.  


I used a Stampin' Up Banner die cut and stamped the sentiment in Catherine Pooler ink, then went over it with Wink of Stella and kinda added a magical effect with the run ink.

Behind the magic curtain, aka Sunny Studio paper, I put the magic trick! I started with some Lawn Fawn paper that looked like a stage curtain to me. Then added "ta-da!" stamped in the same Catherine Pooler ink, and cut out using a Stampin Up Starburst Circle die. 


For her magic trick, the little magician pulled a rabbit out of her hat! I colored all three images using Copic Markers.

The end result is a super cute card that can be used for almost any occasion!


My next card, I wanted to try to created a stage, pieces are a bit rough, but overall, I hope it's cute!

I recently decided to give Rinea Foil Paper a try after seeing my friend Annie's creations (that's her affiliate link). I wasn't sure exactly what I wanted to do with them, but after looking through the ones I ordered, I decided to keep it simple and used a black sheet with embossed stars for the background. 



This little guy has the best cape and his wand shoots magic stars! I colored him, and the table and cards using Copics and used Wink of Stella for glitter accents!


My floor is kraft paper stamped using Stampin Up's Woodgrain background stamp. Behind my little guy, I used some sparkly sticker paper that I picked up at JoAnn's a while back. I HAD to use the curtain that is included in the Magic Show stamp set to finish off his stage. This guy did a card trick, but there are several options included in this set. 

I finished off the card using Catherine Pooler inks and a Lawn Fawn sentiment die for the "Have a magical birthday" sentiment.

We have five new stamp sets, new shaker packs, and a couple new stencils coming out Friday, August 24th at Kindred Stamps, that we think you'll fall in love with as much as we have! Come join us on our team's blog hop for a chance to win a $10 store credit, make sure you leave comments on each blog to be entered. Join our Facebook Fan Club to be kept in the loop about giveaways, share your projects, and see all of our's!





Rachel (You are here)





Thank you for visiting me, today, I will see you soon!

~R. Winn

Wednesday, August 1, 2018

Chubby Unicorn!

Guys... GUYS! 

The day I've been waiting months for is here. I've some how been blessed with amazingly talented friends. I stumbled across this insanely talent gal, Amy, a few months back and stalked her a little bit until we became friends. She told me about her plans to launch her designs from digital stamps to clear, I was on board immediately. I loved the designs that I had purchased from her Etsy store, and well, I love clear stamps. So, when she invited me to join her design team, I was floored.

I am pleased to bring you my first blog as part of the Witt & Sass Stamp Company Design Team! Today, I feature Chubby Unicorn... he's my favorite! My first card, I worked with a design sketch I found from Google (I really can't remember who designed it and I'm sorry for that!) Normally, I build my cards as I go, planning is actually a little outside of my comfort zone.

I had picked some really beautiful pastel papers but they ended up working against this awesome pink dude that I colored up using Copic markers. So... I tried again! I worked with richer, darker colors, the result is beautiful! (Well, at least I think it is!) I wanted him to become the focal point of the card, to make him really pop, I made sure to keep his coloring bright and the background I did in shades of Warm Grey. I finished him with a clear Wink of Stella to add sparkle.


The sentiment, I heat embossed using WOW powder in Earthtone Grape and layered using Stampin' Up's Layering Oval die cuts. The beautiful star strip is from this set too, it reminds me of a bar of music! I used Chameleon Pens to color it, and finish it off with Wink of Stella on the stars. 

Finally, I finished the card off with red and black DoubleClick Skittles and Silver Star Sequins from Pretty Pink Posh.

My next card, I chose the original, full body Chubby Unicorn! I used the Blue Green family, and just colored the shaded parts of him, more of a reflection than color. This was followed by using the colorless blender marker to pull some of the brightness of the color out. My best friend, Molly, and her purple hair were the inspiration for the hair color!


So, I had this adorable unicorn all colored up, with no where to go. I reached into the box of goodies that Witt & Sass Stamp Company is launching with, and pulled out this AMAZING, Background Builder Hill Stencil. I love using stencils in a variety of ways, ink is always fun to play with, but really, we have some truly skilled ink blenders on the team that have been playing with these stencils too. Glitter paste is always fun, but I didn't want to overwhelm the unicorn, then I saw it... my Tonic Embellishment Mousse! I recently have been picking up additional colors here and there. I had the Citrus Green, which was perfect for this grassy hill so I started there. I off-centered the hill a little so you can really see how well it rounds, on a 5.5" x 5.5" card, it covers from edge to edge. On my A2 size, I got to pick my placement!  

You all know I love my clouds, stencils, die cuts... stamps. Well, you've never seen something this fantastic! Amy came up with this brilliant Background Builder Cloud Stencil and my life was completed! I used my powder blue mousse for the base of these clouds (yes, I know clouds are white, but in unicorn world the sky is inverted.) and did the cloud shadows in black ash mousse. After that was all done, I placed my little guy on the hill, and added a few bunches of grass to the top of the hill with the stencil!

The sentiments with this set are just fun, I love how encouraging this card would be to get. I stamped the sentiment out on some scratch pink paper using Versafine and used one end of a Lawn Fawn sentiment banner die cut to give it shape. I layered both my card front and the sentiment strip on purple glitter paper I picked up at Hobby Lobby! To finish the sentiment, I used a Luna Wink of Stella pen to fill in the word "cool"!

I hope you all enjoyed my cards, and if you haven't already, come check out Witt & Sass Stamp Company! We'd love for you to join us on Facebook and to see what you end up making too!

Thank you all for joining me, and thank you to Amy for believing in me!

~R. Winn



Friday, July 27, 2018

Adventures Abroad - Australia

It's time for something cute friends! This week is release week for Beth Duff Designs and the stamps are just adorable. You won't want to miss out!

I got to play with Adventures Abroad - Australia, and I think these little animals and the other images in the set are a great tribute to this beautiful land! I normally color with alcohol markers, but decided to try to flex my colored pencil muscles for these furry friends.

I got 4 of them colored up with my Prismacolor pencils, because I knew I wanted to use them, they are smaller images, so I was able to use more on one card! I used a lightly patterned pink paper for the background to keep it simple.


Next, I framed the emu, kookaburra, and kangaroo with white paper and some Vintage 45 paper, cut using Stampin' Up's Layering Circle dies. I pulled out a fancy frame die from Stampin' Up and used Catherine Pooler's Eucalyptus ink for the sentiment. I topped it off the hat from the set!

I had one little guy left over, and decided the koala with the "cheers" sentiment would make for a cheery note card. I started with the a yellow patterned paper from Sunny Studios and stamped the sentiment directly on it at an angle using Catherine Pooler Manderine Spice ink.


I tucked my koala into the opposite corner and finished the card off with some dark green Nuvo drops from Tonic.

I can't wait for you to see all the other great sets the Beth Duff Designs team is showcasing! I know which are my favorites, but I am excited to hear what your's is!

We are so happy you joined us for Beth Duff Designs's Summer release blog hop! These sets are so fun and we can't wait to see what is on your must have list. Please join us and visit each page in the hop. By leaving a comment on each of the blog posts you will automatically entered to win a coupon for 15 % your purchase on our site! This contest is open to both US and Int'l fans. Thank you so much for joining us, and make sure you join us on Facebook to share your own projects and see what else our team comes up with!



R. Winn Creates - Rachel - You are here!










Thanks for dropping by,

R. Winn

Wednesday, May 30, 2018

The Next Space Explorers!

Guys... guys... GUYS! I am SO excited to share these projects! Kindred Stamps released their new set The Next Space Explorers stamps on May 25th, and to say that I geeked out a lot!

I had so much fun coloring these guys using the no-line technique and Ink On 3's Fade-Out ink, and Copic markers. 

I started by making my first foiled card! I was so nervous that I was going to screw things up. I used Altenew's Warp Speed Stencil that I picked up at Crafty Doodle Chick, DecoFoil's glue pen, and red foil. 

I also tried out my Tonic Studio's Silver Mica spray to create the middle layer of paper for my card, and the sentiment is stamped on a piece too!


My android and blind dude are totally best friends and there for each other through everything!

Next, the Captain is a fan of Earl Grey tea and to me it felt perfect for a gift card holder (some lucky nerd is going to get a Starbucks gift card with it!)


I got him colored up and mounted him on piece of patterned paper from the Sunny Studios Rainbow Bright pack, again from Craft Doodle Chick!


I finished him off by giving him a little shadow with a grey watercolor marker. 

My last card is the chief security officer... He was a little more difficult for me to color, and it shows. But I tried my best, and used the colors I had! I will say, I am pleased with the silvery look of his weapon and sash!


To keep him the hero of the card but not have him too dull, I used the new paper stack that one of the gals in the Kindred Stamps Fan Club shared, and I clearly needed, Echo Park's Space Academy! I grabbed my previously unused Stampin' Up Starbust die (seriously, I've had it for like two years guys...) and cut my patterned paper with it and backed it with dimensionals. I mounted it on a piece of black cardstock.

My last touch was grabbing a random banner I had in my hoarding stash... I may need actual help guys... to use for the sentiment. I love the buildable sentiments that Kindred Stamps does and this one may be one of my favorites! I finished it off with a nice DoublClick Skittle that pulls out the red planets on the paper.

I hope that you enjoyed these projects as much as I enjoyed making them! If you haven't been lucky enough to buy Kindred Stamps, you can set up your account using my referral link and get 10% off http://i.refs.cc/9VcMQuB9?u=1527128718946!

~R. Winn Creates